Stacked brooding hen cage

The following is an introduction to some of the equipment:

1. Brooding cage: It is made of galvanized adjustment plate, which can be raised and lowered as a whole. The standard cage is 1.2*1.2 meters, with partitions in the middle and a denser bottom net. Chicks can be raised reasonably in one cage during the brooding and fattening period.

2. Feeding trough: Made of standard 275g hot-dip galvanized sheet with a thickness of 1.0mm. The galvanized feeding trough can be operated by stepping on it, which is convenient for observing the condition of the chickens, observing the position of the chickens and doing a good job of epidemic prevention.

3. Feeding: Each row of dragon houses is equipped with a feeding device. By operating the control cabinet, the equipment reciprocates to feed. Each layer of the feeder is equipped with a leveler to adjust the feeding amount.

4. Water line: Each water line can be adjusted up and down to meet the different drinking water heights of chickens of different growth sizes in different cages.

5. Lighting: 48V LED lighting is adopted, which is waterproof, safer and has more uniform illumination.

6. Excrement cleaning machine: Linked with the excrement cleaning belt under each cage, it is operated through the control cabinet to automatically clean excrement to the outside. It can be turned on or off at the same time.

7. Environmental controllers and ventilation equipment: including computer controllers, negative pressure fans, water curtains, guide (wind) plates, side wind windows and other linkage equipment.

The selection and use of chick equipment should be determined according to actual conditions and breeding requirements. If necessary, it is recommended to consult our company’s professionals to provide design solutions.

1.Professional poultry house design

you just need to tell us the raising quantity, our design team will recommend you one

suitable model and design the house size for you.

2. Offering one-site service

including project design, quality control, installation, after-sale service and farming guidance.

3.Lifelong agricultural consultant

After-sale service and farming guidance Technical training and ful customer support is

provided for all clients, enabling them to get the most out of their automated poultry farm.

1. Brooding cage:

It is made of galvanized adjusting plate and can be raised and lowered as a whole.

The cage is standard 1.2*1.2 meters, with a partition in the middle and an encrypted bottom net.

The brooding and rearing periods can be reasonably raised in one cage.

2. Feeding trough:

Made of standard 275g hot-dip galvanized sheet with a thickness of 1.0mm.

The galvanized trough can be stepped on and operated, making it easy to observe the

status of the chickens, observe the chicken position and do epidemic prevention.

3. Feeding:

Each row of dragon houses is equipped with one feeding equipment. The equipment is

reciprocally fed by operating the control cabinet.

Each layer of the feeder is equipped with a leveler, which can adjust the amount of material.

4. Water line:

Each water line can be adjusted up and down to meet the problem of different drinking

heights for chickens of different growth sizes in different cages.

5. Lighting:

Use 48-volt LED lighting, which is waterproof and safer, and the illumination is more uniform.

6.Manure cleaning machine:

Linked with the manure cleaning belt under each cage, the equipment automatically cleans

the manure outdoors by operating the control cabinet. Can be turned on or off at the same time.

7. Environmental controller and ventilation equipment:

including computer controller, negative pressure fan, water curtain, guide (wind) board,

side wind window and other linkage equipment.

The selection and use of young chicken equipment should be determined based on the actual

situation and breeding requirements. If necessary, it is recommended to consult our company’s

professionals to provide a design plan.